STEP 1: APPLICATION

1. Remove dust from the material.
2. Mix the oil with a spatula.
3. Apply a few strips of oil on the surface. Do not use too much oil, the surplus product does not enter and must be removed thereafter.

STEP 2: SPREAD - LEAVE TO ENTER

1. For the steps, place a white disk on the handle. For the balusters, use the disc only.
2. Spread the oil uniformly with this disc in a circular motion.
3. Let the oil penetrate for 10 minutes after application. Meanwhile, you can deal with other elements. Do not treat too many things at once, in order to remove excess oil within 20 minutes after application.

1. Remove excess oil with kitchen paper. Be careful that the oil of balusters is well removed from the grooves.
2. All excess oil must be removed, the wood must seem dry to the touch.
3. 24 to 36 hours after treatment, you can move up and down the stairs again.